SZ Series 4-in-1 Screw Air Compressor with Dryer

Explore AIRNOVEX SZ Series 4-in-1 rotary screw air compressors with dryer, receiver and filters. Compare VSD and fixed-speed options and request a quote.
Send us your required quantity, specifications, application and destination country for a detailed quotation.
Request specifications & quotation
An integrated approach to compressed air

Compressed air for your workshop without a room full of separate equipment

The AIRNOVEX SZ Series is an integrated rotary screw air compressor with dryer and tank for workshops and production facilities that need compressed air generation, moisture control and storage in one equipment package. Its oil-injected screw compressor is paired with a refrigerated air dryer, an air receiver and two precision filters.

Choose a permanent magnet variable-speed or fixed-speed arrangement based on your operating pattern. The right package depends on the air required at your working pressure, not motor power alone. The specifications above provide the starting point; the guidance below helps turn those figures into a practical equipment decision.

Discuss an SZ Configuration Share your pressure, flow and operating schedule through the inquiry form.
How the package works

Four essential air-system functions, planned together

An integrated compressed air station simplifies equipment coordination while keeping each function important to the finished air supply.

01

Air generation

The oil-injected rotary screw element provides compressed air for connected tools, machines and pneumatic processes.

02

Moisture reduction

A refrigerated dryer helps manage water vapor and condensation before compressed air reaches the production network.

03

Air storage

The receiver provides a buffer for short fluctuations in demand. Receiver volume and compressor delivery must be assessed separately.

04

Air filtration

Two precision filters add treatment stages within the package. Confirm filter grades against the air quality required at the point of use.

Application fit

Where an all-in-one screw air compressor makes sense

The SZ configuration is worth evaluating when floor space, installation coordination and the need for treated compressed air are all part of the buying decision.

General workshops

A possible fit for facilities operating multiple pneumatic tools, provided simultaneous air demand falls within the selected model's pressure-specific delivery.

Pneumatic assembly

Consider the package for production cells using air-driven cylinders, actuators or tools. Check peak consumption and minimum pressure at the equipment.

Packaging and compact production lines

An integrated station can serve dedicated air users where available installation space and moisture control matter. Confirm downstream air quality before selection.

Important for sensitive processes: The SZ Series uses oil-injected compression. Integrated drying and filtration do not make it an oil-free compressor. Applications involving critical air cleanliness need a separate air-quality assessment.

Drive selection

Variable speed or fixed speed: start with your demand pattern

Permanent magnet variable speed

Consider VSD when air consumption changes significantly during a shift. Speed control can adapt output to demand and reduce unloaded running under suitable operating conditions.

Review minimum and maximum flow, operating hours and the electrical configuration before choosing this option.

Fixed speed without an inverter

Consider fixed speed when the plant's air requirement is relatively steady and the installation calls for a conventional fixed-speed arrangement.

Compare actual load and unload behavior, receiver storage and duty requirements rather than assuming one drive type is always more economical.

Configuration detail: Variable-speed versions list ZONCN or INOVANCE inverter options. Fixed-speed versions are supplied without an inverter. Confirm the selected electrical and component specification in the quotation.

Model selection

Five checks before choosing an SZ Series package

The published range covers the SZ-10A, SZ-15A, SZ-20A, SZ-30A and SZ-50A, with separate 200 L and 400 L package choices listed for the SZ-20A. Use the existing specifications above to compare individual sizes at the same pressure.

  1. Specify the pressure at the machine

    The series lists 8, 10 and 12.5 bar working-pressure options. Include piping and treatment pressure losses when defining the compressor's required operating point.

  2. Measure actual air consumption

    Provide average demand, simultaneous tool use and short peaks in CFM or m3/min. Available delivery changes with working pressure, so do not compare flow values taken at different pressures.

  3. Choose receiver storage for the load profile

    For SZ-20A, the 200 L and 400 L packages share the same listed motor power and delivery values. The larger receiver adds storage, not additional continuous compressor capacity.

  4. Match the site electrical supply

    List the available three-phase voltage and 50 Hz or 60 Hz frequency, along with the destination country. The published range includes several electrical options, subject to final configuration confirmation.

  5. Check air quality and installation conditions

    Confirm required pressure dew point, filtration level, ventilation, ambient conditions, condensate disposal, service access and the space available for the complete package.

Get Help Selecting the Right SZ Model An existing machine's nameplate or measured demand can help with selection.
Before installation

What your compressed air layout still needs

Integrating the main equipment does not eliminate site planning. The complete station needs suitable electrical protection, cooling airflow, connections and routine servicing arrangements.

Allow for the actual cabinet dimensions, air outlet location and the service clearances specified for the quoted package. A separate downstream treatment stage or receiver may be needed if the process or demand profile requires it.

Installation review points

  • Cooling and accessAir movement around the cabinet and room for maintenance.
  • Condensate handlingDrainage and disposal appropriate to an oil-injected compressed air system.
  • Distribution pressurePressure drop through filters, piping and the point-of-use network.
  • Air treatment scopeVerified dryer performance and filter grades for the intended process.
Working with AIRNOVEX

Make the quotation useful for engineering and purchasing

AIRNOVEX accepts industrial compressed air project inquiries covering pressure and flow selection, electrical requirements and equipment configuration. For the SZ Series, that discussion should also include receiver capacity, required air quality and the connection to your existing machinery.

Compare like-for-like operating points

Request the proposed model's air delivery at your specified pressure together with the drive and electrical arrangement, rather than relying on motor power as a shortcut.

Clarify the full equipment scope

Include the dryer, receiver size, filter specification, outlet connection and any project-specific requirements in the quotation discussion.

Comparing other compressor types? You can also review the AIRNOVEX air compressor range before deciding whether an integrated package is appropriate.

Frequently asked questions

Answers for SZ Series buyers and engineers

What equipment is included in a 4-in-1 SZ air compressor?

The SZ package combines an oil-injected rotary screw compressor, a refrigerated air dryer, an air receiver and precision air filtration. The listed package includes two precision filters.

Is the SZ Series suitable for a workshop or pneumatic production line?

It can be considered for workshops, pneumatic assembly and packaging or production equipment. Confirm the flow needed at the operating pressure, peak demand and downstream air-quality requirements before selecting a model.

Does an SZ compressor deliver the same airflow at 8, 10 and 12.5 bar?

No. The published flow ranges differ at 8, 10 and 12.5 bar. Always use the model's air-delivery figures at your required working pressure when comparing sizes.

Should I choose variable speed or fixed speed?

Variable speed is worth considering when compressed air demand changes through the operating day. Fixed speed may suit a more consistent load. Compare the actual duty profile and confirm the final electrical configuration.

What is the difference between SZ-20A with a 200 L and a 400 L receiver?

Both packages have the same listed 15 kW motor power and pressure-specific air delivery. The 400 L version provides more stored air and has a larger package size; it does not increase continuous compressor output.

Can the SZ Series be configured for different three-phase voltages and frequencies?

The reference specifications list three-phase 220 to 230 V, 380 V, 415 V, 420 V and 480 V options with 50 Hz or 60 Hz operation. Confirm availability and the final configuration for your model and destination market before ordering.

Is the built-in dryer and filtration enough for every application?

Not necessarily. The refrigerated dryer and two precision filters provide integrated air treatment, but the required dew point, oil content and particle level depend on the process. Additional treatment may be necessary.

What details are needed to request an SZ Series quotation?

Provide the required pressure and airflow, operating hours, preferred drive type, receiver needs, voltage and frequency, installation country and any air-quality requirements. You can send these through the AIRNOVEX inquiry form.

Project inquiry

Get an SZ Series quotation based on your actual air demand

Tell AIRNOVEX what your equipment needs, where the compressor will operate and which specifications matter most. Use the online inquiry form to request pricing and discuss a suitable package configuration.

Request an SZ Series QuoteOnline product inquiry form
Contact Sales We're here to help
WhatsApp Chat with our sales team Email Us jiangmou2024@gmail.com Request a Quote
OEM / ODM · Global Support